Fire Fighting Pumps SNK UL/FM
Design Features According to UL & FM
All interior bolt or screw that are exposed to pumped liquid shall be of rolled bronze or corrosion resistant material
The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges
Bearings shall have an L-10 rating of not less than 5000 hours at maximum load.
The pumps shall be provided with at least four packing rings plus a lantern ring. The lantern ring may be permitted to replace one ring of packing.
Impellers, wear rings, shafts, lantern rings, glands shall be made of corrosion resistant material.
Following material specifications are applied to STANDART UL/FM fire pumps
Based on 0 reviews
Be the first to review “Fire Fighting Pumps SNK UL/FM”
Related products
-
PUMPS
Pumps SSP-H
Handled Liquids
SSP-H series HC model pumps are centrifugal pumps that have horizontal shaft, volute casing, single stage and closed impeller. Semi-open or vortex impeller types can be applied in different requirements.
Technical Information
Discharge Flange : DN 50…DN 350 mm
Flow : up to 3500 m3/h
Head : up to 100 m
Operating Temperature (°C) : -10 C’ up to +110 CSKU: n/a -
PUMPS
Booster TH GRV-VD / VB
General Information
High pressure, quiet running, compact and low power consumption. GRV-VD / VB pumps are suitable for pumping non-abrasive, clean or slightly contaminated, low viscosity without solid & fibrous particles liquids. Vertical structure saves space.
Technical Information
Capacity : up to 60 kW
Head : up to 170 m
Casing Pressure (Pmax) : 10 – 16 – 25 bar
Operating Temperature (°C) : up to +50 CSKU: n/a -
PUMPS
Booster TH CDLF
General Information
High pressure, quiet running, compact and low power consumption. All surfaces that contact with the liquid are stainless steel, ln-line (straight pipe attachable) type pumps. CDLF pumps are suitable for pumping non-abrasive, clean or slightly contaminated, low-viscosity liquids without solid & fibrous particles. Bearing is provided by tungsten carbide sliding bearings. Vertical structure saves space.
Technical Information
Capacity : up to 110 kW
Head : up to 160 m
Casing Pressure (Pmax) : 10 – 16 – 25 bar
Operating Temperature (°C) : -10 C up to +120 CSKU: n/a -
PUMPS
Booster TH SB
General Information
It is high pressure, quiet running, compact and low power consumption. SB pumps are suitable for pumping non-abrasive, clean or slighty contaminated, low viscosity liquids without solid & fibrous particles. Vertical structure saves space.
Technical Information
Flow : up to 15 m3/h
Head : up to 120 m
Casing Pressure (Pmax) : 10 – 16 bar
Operating Temperature (°C) : 0 C’ up to +50 CSKU: n/a
There are no reviews yet.